• 610798533-968296654
  • 24/48h only peninsular
  • Opening hours M-F 9:00 to 14:00 and 16:00 to 19:00h
  • 610798533-968296654
  • 24/48h only peninsular
  • Opening hours M-F 9:00 to 14:00 and 16:00 to 19:00h

Tenacious Tape GORE-TEX Fabric Patches

Product no.: 153118

8.95 €
incl. VAT, plus delivery
In stock

Description

When GORE-TEX® jacket get a tear, don’t despair. Fix it with Tenacious Tape GORE-TEX Fabric Patches. This GORE-TEX patch kit contains two adhesive-backed fabric repair tape. The pressure sensitive patches can be cut to the size and shape you need for any hole, rip or tear on waterproof-breathable jackets, ski pants and gloves. Iron on or apply heat to the patch for a few minutes for greater durability. For fast, long-lasting repairs to high-tech gear, use Tenacious Tape GORE-TEX Fabric Patches.

GORE-TEX Fabric – Patches are made of GORE-TEX material for true waterproof protection
Powerful – Strong tape with ultra-aggressive adhesive provides maximum hold to fix rain coats, ski pants and gloves
Fast Repairs– No sewing skills required; simply remove backing and apply with some pressure or heat
Washable – Ultra-strong repair tape bonds to outdoor fabrics and materials and won’t peel off even when washed
Multipurpose – Fix virtually any type of GORE-TEX gear with durable fabric tape in two sizes (3" round and 2"x4" rectangle)

Available in black only

Suitable for repairs to most Gore-Tex products and / or other technical breathable clothing or footwear etc.

Provides a strong, flexible water-resistant infield repair

Can be ironed on to provide stronger adhesion and permanent repair

Repaired item can be used immediately

Residue-free patch removal

Each patch contains a strong, pressure sensitive adhesive with an easy-to-remove backing tape to aid easy application

Kit contains two pressure sensitive black patches – one round 7.6 cm diameter for holes and smaller tears and one rectangular patch 5 x 10 cm for larger rips and tears

Lightweight patch – weighs only 4 g – easily packs into a wallet or pocket for emergency use

USE:

The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX® fabric products.

For quick infield repair ensure that the area to be repaired is clean and dry. Especially remove any dirt or loose debris. Select a patch that overlaps the tear by at least 12 mm in all directions. If possible, lay damaged area of garment over a flat, firm surface before applying patch. Remove release paper from back of patch. Grasp patch so that initial pressure and contact with garment can be made from the centre of patch rather than the edge. For best results, apply finger pressure from the centre of the patch out toward edges, working in different directions to cover the full area of the patch. If patch wrinkles upon application, quickly lift off and reapply. Garment can be used immediately, however, the adhesive will continue to strengthen over the next 12 to 24 hours.

For home-repair ensure that the area to be repaired is clean and dry. Especially remove any dirt, grease or oil by hand laundering; allow to drip dry. Machine laundering should be avoided to keep the tear from getting larger or fraying. Follow the Quick Field Repair directions for the selection of patch size and application to garment. Patches can be cut to size if desired, but all corners should be left rounded for better adhesion. After the patch has been applied, tumble the garment in a dryer for 30 minutes on regular setting or, better yet, warm the patch with a clean iron. Set the iron to medium or permanent press heat. Use moderate pressure and circular motion for 30 seconds to heat evenly.

The easiest way to remove a patch is to have the garment dry cleaned. If dry cleaning is not recommended or it does not entirely remove the patch the first time, then try the following: Warm the patch for 30 seconds using an iron set to medium or permanent press heat. Use moderate pressure and a circular motion to heat evenly. Quickly lift up an edge or corner and pull slowly but firmly across the patch. Be careful not to make the rip or tear larger when doing so. When the area has cooled, remove the adhesive residue with rubbing alcohol and some terry cloth. Rub in a circular motion for at least one minute until the adhesive has lifted. Dry cleaning will also remove any residue.

• Patches should be kept in sealed plastic bag until used.

• Area to be repaired must be clean and dry.

• Patch will not adhere effectively to loose debris, grease or oil.

• Patch should overlap tear by at least 1cm in all directions.

• Remove release paper from back of patch. Lay GORE® product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the entire patch area.

• Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours.

• The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds.

Material: GORE-TEX fabric
Color: black
Size: 3” round and 2” x 4” rectangle
Application: peel and stick or use iron to increase bond strength
Application Temperature: room temperature
Removable: yes
Washable: yes
Storage: store in a bag or container
Made in USA