Robens airbed 'Prima Core 90' - 9.0 cm

The horizontal air chambers provide a great laying feel and weight distribution. Comes with a good push/lock valve, compression straps and a carrying bag.

 

PrimaLoft® filling for insulation
Robens Peak Valve with one-way technology and very high airflow properties
Good insulation to weight ratio
Carrybag included
Horizontal baffle design makes the mat adapt well to the body and gives a firm support
PFC free

Inflate a Robens airbed with Peak valve

The airbed can be inflated by mouth by breathing air into the valve – but we recommend the use of a Robens Pump Sack for easy and quick inflation of the airbed. By using the Pump Sack the airbed is inflated without introducing humidity.

1. Open the valve on the airbed and attach the nozzle of the Pump Sack to the valve.

2. Open the Pump Sack to fill it with air. Close the opening of the Pump Sack and roll/press down on the Pump Sack to pump air into the airbed. Repeat this until the airbed is inflated. Remove the Pump Sack nozzle from the valve and close the valve.

3. Deflate the airbed. Open the valve and use a finger to push down the peak valve to release the air from the airbed.

Roll up the airbed and pack it in the carrybag.

Instructions for mat repair
1. To locate a small puncture, inflate the mattress and blow some air by mouth into the mattress, then close the valve (first push in the valve and then lock it).

2. Apply any liquid soap to wet the surface of the mattress. Small escaping bubbles will indicate the puncture.

3. Mark the puncture.

4. Clean and dry the surface around the puncture.

5. Open the valve and release the air. Remove the cover from the patch. Press the patch so it covers the cut or tear.

6. Two hours later, inflate the mattress and examine the repair.

Fabric: 30D ripstop nylon, TPU coated, 100% nylon
Size: 195 x 60 x 9 cm (LxWxH)
Filling: PrimaLoft® Infinity, 60g /m2, 100% polyester
Valves: Peak Valve
R-Value: 2.6 (0°C)
Colour: Warm Red
Pack size: 33 x 11 cm
Weight: 830 g
Item number: 310081