Gear Aid Seam Grip+FC. Tent Seam Sealant 10603

Seam Grip FC is a fast-curing, water-based tent seam sealer. Previously known as Seam Sure, this waterproofing sealant comes in a 2 fl oz bottle and seals up to 60 ft of seams or fabric. The liquid formula is perfect for family-sized tents, tarps and pop-ups made of nylon. Just apply a thin film to the inside seams and allow to dry to a clear, flexible seal. Don’t let rain ruin an outdoor experience. Seal and waterproof tent seams in no time with Seam Sure FC and stop leaks before they happen.

· Long-lasting – Water-based urethane sealant is unaffected by extreme temperatures and keeps moisture out all year long

· Fast Acting – Formula cures in just two hours for an application on tent seams that’s quick and easy

· Waterproof – Provides a water-tight seal that won’t peel or crack over time, keeping adventurers warm and dry

· Flexible – Dries to a clear sealant that flexes with fabric and stays intact without flaking off

· All-purpose – Seals nylon, polyester, vinyl, canvas and other outdoor fabrics

Tips for Using Seam Grip FC

PRODUCT APPLICATION INSTRUCTIONS

Our unique brush applicator allows the user to easily apply Seam Grip FC into needle holes, sewn joints, corners and under lap-felled and folded seams.

STEPS

1. Clean and dry all surfaces.

2. Remove old seam sealer with stiff bristle brush and isopropyl alcohol.

3. Shake well before use.

4. Remove inner foil and pull brush top open.

5. Squeeze bottle gently and apply a thin, even film to stitching on coated side of fabric (or inside of item).

6. Use brush to work into needle holes, sewn joints, corners and under lap-felled and folded seams.

7. Clean drips and excess with damp cloth.

8. Allow to fully dry before use or folding – minimum two (2) hours at room temperature or longer if colder. Test for dryness before use.

SPECIAL TIPS

Once cured, Seam Grip FC may have a surface tack. You can alleviate this tackiness by adding talcum or baby powder. Sprinkle the powder on the cured adhesive and you should no longer have any issues with the seams sticking to one another.

Perimeter seams on ‘seam taped’ tents are not factory sealed and require sealing. Apply a thin film of Seam Grip FC to inside floor seams. Allow drying overnight.

Use Seam Grip FC to seal areas that regularly leak, such as stakeout points at corners.

To seal the seams on your rainfly, set it up inside out for easier application. Attach the rainfly to the tent so all seams are taut.

CARE INSTRUCTIONS

Close brush top and wash bristles with soap and water immediately after use. Stiff bristles may be loosened with lacquer thinner. Store in cool, dry place.